Home /  Relative Equipments /  FLUTE LAMINATOR

High Speed Flute Laminator

Product Introduction
High Speed Laminator is ideal for the lamination of cardboard and corrugated boards. The top feeder is made in Taiwan which is the same grade with the feeder group of printing machine. It is high-speed and stable for the top feeder to feed the paper.This machine adapts the YASKAWA brand Servo Regulator which in made in Japan to square the top paper and to laminate with bottom paper accurately. The tolerance is within ±1.5mm. It only requires less experience from operators.The corrugated paper is delivered smoothly by the NITTA brand suction belts made in Japan to collocate with vacuum system. It also adapts gluing structure by four rollers to control the gluing thickness and amount.
Machine Features

>Adopt Japanese brand of PLC control system. Digital Position, Easy Operation, Servo Regulation and Double-sheet detection system.

>To collocate with skip suction belts with vacuum system on feeder. The feeding work is accurately achieved.

>The main machine is controlled by the touch screen of human machine interface. By entering the related sheet specification, the width of both top and bottom sheet will be automatically positioned to shorten the set-up time.

>Adopt the synchronous driving system at low noise.

>Adopt Japan-made Servo Regulation System to square the top paper and achieve a smooth feeder, without slant and to laminate with bottom paper accurately and efficiency.

>The accurate and stable gap between the front edge of the top and bottom sheets has an excellent contribution to the performance of next automatic die cutting procedure.





Materials of Bottom Sheets

Corrugated board, from 350g to AB flute

Materials of Top Sheets

Cardboards from 120g to 500g

Max. Paper Size



Min. Paper Size


Tolerance (mm)


Max. Machine Speed

8,500 sheets/per hour

Total Power Required





Machine Layout