- Die Cutting & Stamping Column
- ML series Manual Die Cutting & Creasing Machine
- TYMB750/930/1100 Manual Foil Stamping & Die Cutting Machine
- LH-1050ES Automatic Full Stripping Die Cutting Machine
- LH-1050D Automatic Deep Embossing Die Cutting Machine
- LH-1050FH Automatic Foil Stamping & Die Cutting Machine
Automatic Foil Stamping & Die Cutting Machine

LH-1050FH in order to meet various request of printing and packing market, we designed 1050FH Automatic Foil Stamping Die Cutting Machine, which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.
This machine adopts numerous advanced pneumatic and servo driving processing technology from abroad. After the strict assembly quality control, it has advantage of simple operation and safe reliable.
It could foil stamping, creasing and die cutting after printing products, such as more than 80g/m2 paper, cardboard, corrugated paper below 4mm, pasting paper, laminating paper and so on.
Good quality and design makes machine work stably and safety when machine’s speed reach 7500 sheets/h. This machine will provide you to enjoy the comfortable operation and faster return on investment.
1.Feeding section
The design of stacker preparatory stage was improved, it
could use prepared car sheet piling. Also could use ordinary hydraulic car
sheet piling to stacker directly. The machine has four suction nozzles and four
sending nozzles in feeder, ensure feed smoothly. Adopt import screw air-blowing
device, it could make the sheet send smoothly.
2.Feeding positioning section
The incline-type paper moving table top is more suitable
to high-speed thin paper and location. Side location adopt dual purpose side
device with pull guide and push guide, accounting to paper choose, it makes
switch easier. It could switch front rise position arriving reduction of speed
device, it is benefit of thin paper’s location.
3. Cutting Section/Horizontal and vertical foil stamping system
Adopt advanced technology with single gripper location
could adjust the front-and-back registration. Horizontal hot stamping
dual-anxis/Vertical hot stamping collection of waste foil frame into operation
side, it is benefit of operation. 12 electric heating areas have timing
penumatic temperature controller function, each area can be controlled
separately. It makes foil-delivering servo curve tracking the speed variation
of machine in time for using motion controller. So it could reach the
foil-delivering smoothly.
4. Foil Stamping/ Die Cutting Section
The driving gear ensures high speed of die cutting
together. The pneumatic locking mechanism and air clutch are fast and stable.
The die cutting frame can prevent the die cutting plate from drooping or
separating effectively.
5. Quick Changed Foil Device/ Two shafts in this section
Vertical under foil frame could be pulled out of machine,
so that it could make the foil work more convenient.
6. Rewinding Device
There has brush rewinding foil function. And it has
equipped with a simple collection waste foil device.
7.Delivery section
Delivery section add tester into security system. It is
equipped with inset counter. Using subsection could adjust brush and sheet
air-blowing device, so the finished product of delivery section could product
stably. Gripper drive train expanded buffer device.
8.Pneumatic clutch
The imported high quality pneumatic clutch reduces noise
and minimizes impact when stopping the machine at a high speed.
9.Lubrication system
With a programmable lubrication system, the accurate
control of PLC ensures balanced lubrication of the machine.
10.Air pump
Adopt imported equipment, improve the stability of the
machine, low noise, high performance, long service life.
11.Gripper and chain
The grippers are made of special extra hard aluminum alloy, with anode treatment on the surface, ensuring accurate die cutting and embossing, ect. at high speed. The adjustment mechanism, patent design guarantees very accurate control. An imported chain is used for the main gripper transmission, with strength increased by 45% for accurate stability and prolonged life.
Model |
1050FH |
Name |
Automatic Foil Stamping Die Cutting Machine |
Max. Sheet Size |
1050×750mm |
Min. Sheet Size |
400×360mm |
Max. Cutting Range |
1040×720mm |
Inner Chase Size |
1080×745mm |
Die Cutting Steel Plate Size |
1080×736mm |
Paper Thickness |
80-2000 g/m2 Cardboard Corrugated paper≤4mm |
Min. Waster Side Width |
8mm |
Max. Mechanical Speed |
7500 sheets/h |
Max. Die Cutting Pressure |
300T |
Max. Feeding Pile Height |
1550mm |
Max. Delivery Pile Height |
1400mm |
Total Weight |
16.8T |
Dimensions |
7060(5600)×4669×2230mm |
Max. Foil Stamping Range |
1020×600mm |
Stamping Temperature Range |
0°C-200°C |
Heated Plate Power |
24kw |
Total Power |
57kw |
380V 50Hz |
|
Air compressor |
0.8Mpa, 0.36m3/min, 3kw |
Vertical foil stamping section performance specification |
|
Max. Foil Width |
1020mm |
Min. Foil Width |
25mm |
Max. Length of Pull Foil |
700mm |
Max. Diameter of Foil |
Φ240mm |
Horizontal foil stamping section performance specification |
|
Max. Foil Width |
600mm |
Min. Foil Width |
25mm |
Max. Length of Pull Foil |
1020mm |
Max. Diameter of Foil |
Φ200mm |
The material of machine: Ductile iron (Nodular cast iron)
